Türkiye Prefabrik Birliği | Sayı: 155

MAKALE BETON PREFABRİKASYON TEMMUZ 2025 ◆ SAYI : 155 28 Kıpçak, F., B. Erdil, M. Tapan, and A. Karaşin. 2023. “The Effect of Voids on Flexural Capacity of Reinforced Concrete Slabs.” Periodica Polytechnica Civil Engineering , 67 (4). https://doi.org/10.3311/PPci.21988. Kremmyda, G. D., Y. M. Fahjan, I. N. Psycharis, and S. G. Tsoukantas. 2017. “Numerical investigation of the resistance of precast RC pinned beam-to-column connections under shear loading.” Earthq Eng Struct Dyn , 46 (9): 1511–1529. John Wiley & Sons, Ltd. https://doi.org/10.1002/ EQE.2868. Kremmyda, G. D., Y. M. Fahjan, and S. G. Tsoukantas. 2014. “Nonlinear FE analysis of precast RC pinned beam-to-column connections under monotonic and cyclic shear loading.” Bulletin of Earthquake Engineering , 12 (4). https://doi.org/10.1007/s10518- 013-9560-2. Krishnan, T., and R. Purushothaman. 2020. “Development and testing of damage controllable precast beam– column connection under reverse cyclic loading.” Asian Journal of Civil Engineering , 21 (8). https://doi. org/10.1007/s42107-020-00281-9. Magliulo, G., C. Di Salvatore, and M. Ercolino. 2021. “Modeling of the Beam-To-Column Dowel Connection for a Single-Story RC Precast Building.” Front Built Environ , 7. https://doi. org/10.3389/fbuil.2021.627546. Meydanli Atalay, H., and S. Ozden. 2021. “Cyclic Behavior of Beam-Column Connections in Precast Structures.” Front Built Environ , 7. https://doi. org/10.3389/fbuil.2021.639778. Mohamad, M. E., and I. S. Ibrahim. 2015. “Interface shear strength of concrete- to concrete bond with and without projecting steel reinforcement.” J Teknol , 75 (1). https://doi. org/10.11113/jt.v75.3707. Patil, S. R. 2021. “Experimental and Numerical Characterization of Stiffness Parameters for Tapered Elastomeric Bridge Bearing Pads.” PhD Thesis. Florida: University of Florida. Pavan Venkata Naga Sai, B., D. C. K. Agarapu, and A. Eluru. 2020. “Assay of moment resisting precast and monolithic frames using ABAQUS software.” Mater Today Proc . Qusay Ali, Q., B. Erdil, and T. Mohammed Jassam. 2023. “Critical cold joint angle in concrete.” Constr Build Mater , 409: 133881. https://doi. o r g / h t t p s : / / do i . o r g / 10 . 1016 / j . conbuildmat.2023.133881. Safecast. 2012. Design Guidelines for Connections of Precast Structures under Seismic Actions . Luxembourg (Luxembourg): Publications Office of the European Union. Sakcalı, G. B., İ. Yüksel, and S. Sağıroğlu. 2023. “Beton İçindeki Düz Yüzeyli ve Kum Kaplı Donatı Çubuğu Aderans Davranışının Eğilmede Aderans Yöntemiyle Deneysel ve Sayısal Olarak İncelenmesi.” Journal of Pol ytechnic. https://doi.org/10.2339/ politeknik.1097459. SBB Report. 2023. “2023 Kahramanmaraş ve Hatay Depremleri Raporu.” Strateji ve Bütçe Bakanlığı , h t t p s : / / www . s b b . g o v . t r / w p - content/uploads/2023/03/2023- K a h r a m a n m a r a s - v e - H a t a y - Depremleri-Raporu.pdf. Shukri, S., N. Taib, N. M. Husain, and M. Taib*. 2019. “Finite Element Analysis On Beam To Column Connection In Ibs Panel.” Simulia. 2016. ABAQUS 6.14 user’s manuals. (http://130.149.89.49:2080/ v6.14/index.html, ed.). Dassault Systems Simulia Corporation. TBDY. 2018. Türkiye Bina Deprem Yönetmeliği (Turkey Building Earthquake Regulation). Ankara, Turkey: Republic of Turkey Ministry of Environment and Urbanization. TS 500/2000. 2000. Betonarme Yapıların Tasarım ve Yapım Kuralları. Türk Standartları Enstitüsü . Ankara, Turkey. TS ISO 9194. 1997. Yapıların Projelendirilme Esasları-Taşıyıcı Olan ve Olmayan Elemanlar Depolanmış Malzemeler-Yoğunluk. Türk Standartları Enstitüsü . Ankara, Turkey. Wang, R. Z., S. K. Chen, K. Y. Liu, C. Y. Wang, K. C. Chang, and S. H. Chen. 2014. “Analytical simulations of the steel-laminated elastomeric bridge bearing.” Journal of Mechanics , 30 (4). https://doi.org/10.1017/ jmech.2014.24. Yüksel, E., H. Ataköy, G. Barka, Ş. Güner, and Ü. Özkan. 2023. “6 Şubat 2023 Kahramanmaraş Depremlerinin Önüretimli Betonarme Yapılara Etkisinin Değerlendirilmesi.” Türkiye Prefabrik Birliği Beton Prefabrikasyon Dergisi , 146: 9–26. Yun, X., and L. Gardner. 2017. “Stress- strain curves for hot-rolled steels.” J Constr Steel Res , 133. https://doi. org/10.1016/j.jcsr.2017.01.024. Zhou, T., Y. F. Wu, and A. Q. Li. 2018. “Numerical Study on the Ultimate Behavior of Elastomeric Bearings under Combined Compression and Shear.” KSCE Journal of Civil Engineering , 22 (9). https://doi.org/10.1007/s12205- 018-0949-y. Zoubek, B., A. Babič, M. Dolšek, M. Fischinger, and T. Isaković. 2021. “Recent Advances in the Research of the Seismic Response of RC Precast Buildings at the University of Ljubljana.” Front Built Environ . Zoubek, B., T. Isakovic, Y. Fahjan, and M. Fischinger. 2013. “Cyclic failure analysis of the beam-to-column dowel connections in precast industrial buildings.” Eng Struct, 52. https://doi. org/10.1016/j.engstruct.2013.02.028.